TRE-G3TAJ OEM board is based on our TRIUMPH Technology implemented in our TRIUMPH Chip. For the first time in the GNSS history we offer up to 100 Hz RTK. The TRE-G3TAJ board includes the true Galileo option.
The main advantage of this board is the In Band Interference Rejection (IBIR) availability.
The on-board power supply on TRE-G3TAJ OEM board accepts any voltage from +4.5 to +40 volts and delivers clean filtered voltage where needed. This eliminates the risk of power contamination (ripples) that can be created when clean power is generated elsewhere and delivered to the board via cables.
TRE-G3TAJ board also includes drivers for four LEDs, ON/OFF and function button controllers. In addition, the board comes with large amount of flash
for data storage. The CAN interface in TRE-G3TAJ board is provided complete with all associated hardware and firmware, not just the CAN bus. The same is true with all the serial RS232/RS422 ports in our board. Simply stated, additional functions are not needed to incorporate any of our TRE-G3TAJ OEM board in most applications.
In addition to timing strobes and event markers, the TRE-G3TAJ OEM board includes the option of complete IRIG timing system.
Tracking Features: Total 216 channels: all-in-view, GPS L1/L2/L2C/L5, Galileo E1/E5A, GLONASS L1/L2, SBAS, Advanced Multipath Reduction, Fast acquisition channels, High accuracy velocity measurement, Almost unlimited altitude and velocity (for authorized users)
Data Features: Up to 100 Hz update rate for real time position and raw data (code and carrier), 10 cm code phase and 1 mm carrier phase precision, Hardware Viterbi decoder, RTCM SC104 versions 2.x and 3.x Input/Output, NMEA 0183 versions 2.x and 3.0 Output, Code Differential Rover, Code Differential Base, Geoid and Magnetic Variation models, RAIM, Different DATUMs support, Output of grid coordinates
Data Storage: Up to 2048MB of onboard non-removable memory for data storage
Input/Output: Three high speed RS232 serial ports (up to 460.8 Kbps), High speed RS422 serial port (up to 460.8 Kbps), High speed USB 2.0 device port (480 Mbps), Full-duplex 10BASE-T/100BASE-TX Ethernet port, Two CAN 2.0 A/B ports, IRIG timecode output, Two 1-PPS outputs synchronized to GPS, GLONASS or UTC, Two Event Marker inputs, External Frequency Input/Output, MinPad interface: Four external LED drivers, ON/OFF control and External Command inputs, Four Configurable Lodic-Level GPIO ports