TR-G2T OEM board is based on Javad's TRIUMPH Technology implemented in their TRIUMPH Chip, Offering up to 100 Hz RTK. The TR-G2T board includes the true Galileo option.
The on-board power supply on TR-G2T OEM board accepts any voltage from +4.5 to +40 volts and delivers clean filtered voltage where needed. This eliminates the risk of power contamination (ripples) that can be created when clean power is generated elsewhere and delivered to the board via cables. TR-G2T board also includes drivers for four LEDs, ON/OFF and function button controllers. In addition, the board comes with large amount of flash for data storage. The CAN interface in TR-G2T board is provided complete with all associated hardware and firmware, not just the CAN bus. The same is true with all the serial RS232/RS422 ports in our board. Simply stated, additional functions are not needed to incorporate any of our TR-G2T OEM board in most applications.
In addition to timing strobe and event marker, the TR-G2T OEM board
includes the option of complete IRIG timing system.
Tracking Features: Total 216 channels: all-in-view, GPS L1/L2/L2C/L5, Galileo E1/E5A, SBAS, Advanced Multipath Reduction, Fast acquisition channels, High accuracy velocity measurement, Almost unlimited altitude and velocity(for authorized users)
Data Features: Up to 100 Hz update rate for real time position and raw data(code and carrier), 10 cm code phase and 1 mm carrier phase precision, Hardware Viterbi decoder, RTCM SC104 versions 2.x and 3.x Input/Output, NMEA 0183 versions 2.x and 3.0 Output, Code Differential Rover, Code Differential Base, Geoid and Magnetic Variation models, RAIM, Different DATUMs support, Output of grid coordinates
Data Storage: Up to 256MB of onboard non-removable memory for data storage
Input/Output: Two high speed RS232 serial ports(up to 460.8 Kbps), High speed RS422 serial port (up to 460.8 Kbps), Full speed USB 2.0 port (12 Mbps), CANopen interface, IRIG timecode output, One Event Marker input, One 1-PPS output synchronized to GPS or UTC, MinPad interface: Four external LED drivers, ON/OFF control and External command inputs