Tel: +44 (0)1425 838541 Email: sales@cbil.co.uk
CBIL > Products > JAVAD GNSS > JAVAD OEM Quattro-G3D

JAVAD Quattro-G3D OEM Board

Quattro-G3D OEM board is based on Javad's TRIUMPH Technology implemented in their TRIUMPH Chip. The Quattro-G3D board includes the true Galileo option.

Quattro-G3D is a 100x120 mm board that accepts inputs from up to four antennas. It is equivalent of four receivers which operate synchronously with a common oscillator and central processor to coordinate all communications and other activities. One of the receivers (the main) tracks 14 each of GPS L1/L2, GLONASS L1/L2 and Galileo E1. This receiver can perform long baseline RTK in conjunction with a base. The other three receivers each track 14 each of GPS L1/L2, and Quattro-G3D Galileo E1 and along with the main one can provide attitude (orientation) solutions.

Dual frequency GPS alone can provide very fast and reliable orientation solutions due to very short antenna separations (about one meter) and the fact that typical applications are in open fields. The main GPS+GLONASS L1/L2 unit can help in providing long baseline RTK solution.

The on-board power supply on Quattro-G3D OEM board accepts any voltage from +6 to +40 volts and delivers clean filtered voltage where needed. This eliminates the risk of power contamination (ripples) that can be created when clean power is generated elsewhere and delivered to the board via cables. Quattro-G3D board also includes drivers for four LEDs, ON/OFF and function button controllers. In addition, the board comes with large amount of flash for data storage.

The CAN interface in Quattro-G3D board is provided complete with all associated hardware and firmware, not just the CAN bus. The same is true with all the serial RS232/RS422 ports in our board. Simply stated, additional functions are not needed to incorporate any of our Quattro-G3D OEM board in most applications.

In addition to timing strobes and event markers, the Quattro-G3D OEM board includes the option of complete IRIG timing system.

Tracking Features: Total 216 channels: all-in-view, GPS L1/L2/L2C, Galileo E1, GLONASS L1/L2, SBAS, Advanced Multipath Reduction, Fast acquisition channels, High accuracy velocity measurement, Almost unlimited altitude (for authorized users).

Data Features: Up to 100 Hz update rate for real time position and raw data (code and carrier), 10 cm code phase and 1 mm carrier phase precision, Hardware Viterbi decoder, RTCM SC104 versions 2.x and 3.x Input/Output, NMEA 0183 versions 2.x and 3.0 Output, Code Differential Rover, Code Differential Base, Geoid and Magnetic Variation models, RAIM, Different DATUMs support, Output of grid coordinates.

Data Storage: Up to 2048MB of onboard non-removable memory for data storage.

Input/Output: Three high speed RS232 serial ports (up to 460.8 Kbps), High speed RS422 serial port (up to 460.8 Kbps), High speed USB 2.0 device port (480 Mbps), Full-duplex 10BASE-T/100BASE-TX Ethernet port, Two CAN 2.0 A/B ports, IRIG timecode output, Two 1-PPS outputs synchronized to GPS, GLONASS or UTC, Two Event Marker inputs, External Frequency Input/Output, MinPad interface: Four external LED drivers, ON/OFF control and External Command inputs, Four Configurable Lodic-Level GPIO ports.

Tracking Features

  • Total 216 channels: all-in-view
  • GPS L1/L2/L2C
  • Galileo E1
  • GLONASS L1/L2
  • SBAS
  • Advanced Multipath Reduction
  • Fast acquisition channels
  • High accuracy velocity measurement
  • Almost unlimited altitude and velocity (for authorized users)

Data Features

  • Up to 100 Hz update rate for raw data (code and carrier), real time autonomous, and DGPS position
  • Up to 20 Hz update rate for RTK position and real time attitude
  • 10 cm code phase and 1 mm carrier phase precision
  • Hardware Viterbi decoder
  • RTCM SC104 versions 2.x and 3.x Input/Output
  • NMEA 0183 versions 2.x and 3.0 Output
  • Code Differential Rover
  • Code Differential Base
  • Geoid and Magnetic Variation models
  • RAIM
  • Different DATUMs support
  • Output of grid coordinates

Data Storage

  • Up to 2048MB of onboard non-removable memory for data storage

Input/Output

  • Three high speed RS232 serial ports (up to 460.8 Kbps)
  • High speed RS422 serial port (up to 460.8 Kbps)
  • High speed USB 2.0 device port (480 Mbps)
  • Full-duplex 10BASE-T/100BASE-TX Ethernet port
  • Two CAN 2.0 A/B ports
  • IRIG timecode output
  • Two 1 PPS outputs synchronized to GPS, GLONASS or UTC
  • Two Event Marker inputs
  • External Reference Frequency Input/Output
  • MinPad interface: Four external LED drivers, ON/OFF control and External Command inputs
  • Four Configurable Lodic-Level GPIO ports

Electrical

  • On-board power supply accepts any unregulated voltage between +6 to +40 Volts
  • Keep-Alive Power input accepts any unregulated voltage between +4.5 to +40 Volts
  • The central pin of the antenna connector outputs +5 VDC to power LNA. The sourced current is 0.1 A max.
  • Power consumption: 5.2 Watt

Input/Output

  • Three high speed RS232 serial ports (up to 460.8 Kbps)
  • High speed RS422 serial port (up to 460.8 Kbps)
  • High speed USB 2.0 device port (480 Mbps)
  • Full-duplex 10BASE-T/100BASE-TX Ethernet port
  • Two CAN 2.0 A/B ports
  • IRIG timecode output
  • Two 1 PPS outputs synchronized to GPS, GLONASS or UTC
  • Two Event Marker inputs
  • External Reference Frequency Input/Output
  • MinPad interface: Four external LED drivers, ON/OFF control and External Command inputs
  • Four Configurable Lodic-Level GPIO ports

Electrical

  • On-board power supply accepts any unregulated voltage between +6 to +40 Volts
  • Keep-Alive Power input accepts any unregulated voltage between +4.5 to +40 Volts
  • The central pin of the antenna connector outputs +5 VDC to power LNA. The sourced current is 0.1 A max.
  • Power consumption: 5.2 Watt

Environmental

  • Operating Temperature: -35°C to +75°C
  • Storage Temperature: -40°C to +85°C
  • Operating Temperature: -35°C to +75°C
  • Storage Temperature: -40°C to +85°C
  • High shock and vibration resistance

Physical

  • Dimensions: 100x120 mm
  • Weight: 130 g
  • Digital connector: 64-pin DIN41612 type B Right Angle, AMP p/n 536052-5.
  • RF connectors: MMCX Jack, edge mount, AMPHENOL, P/N 908-22100